Contact Person
Manoj Kasliwal
( Director )

Service Information

Electric Wire Rope Hoist

Electric Wire Rope Hoist

Electric Wire Rope Hoist MORRIS Rope Master Electric Hoists are designed as per requirements of IS: 3938 for heavy duty operations and repetitive use under most severe operating conditions.
Detailed Description
FRAME: Made from MS Rolled Steel Plates. ROPE DRUM: Made from seamless steel pipe with spiral grooves on working surface. ROPE GUIDE: Made from Cast Iron FG 200/220 to IS: 210, ensures smooth winding of wire rope. WIRE ROPE: As per IS: 2266 of reputed make, suitable construction and with ample factor of safety. HOOK: Made of forged steel as per IS: 3815, supported on thrust bearing. SQUIRREL CAGE INDUCTION MOTORS: Conforms to IS: 325, totally enclosed surface cooled, hoist duty type, operating at 415V, 3 Phase, AC Supply. HOIST GEAR BOX: First stage & high speed gears are of helical type and subsequent stage gears are of spur type. BEARINGS: Deep groove ball bearings of reputed make are used on all rotating parts and are grease packed. HOIST LIMIT SWITCH: Normal roller type limit switch provided for both over hoisting & over lowering. PENDANT PUSH BUTTON: Provided with control voltage of 24V as standard. TROLLEY ADJUSTMENT: Side plates can be easily adjusted for different beam sizes by re-locating the spacers. HOIST MOUNTINGS: Hoist can be supplied with fixed suspension bracket / push-pull trolley (up to 2Te capacity) geared trolley / power trolley. CONTROL PANEL: Provided with HRC Fuses, Overload Relays & Contactors.
close
Send Your Message
 
Error message
change-chapcha

Enter code: